PARWANCPU状态机设计.docx

1、PARWANCPU状态机设计 基于FPGA的数字系统设计 大作业 学号： 13091378 姓名： 邢武天 班级： 130914 题目一：设计Parwan 的control section 内部状态机s1s2.s9,并给出功能仿真？ 题目二：利用分层结构设计ParwanCPU,并给出功能仿真? （利用在实验课中所给出的TESTBENCH）实验原理图Control Section Structure：s1s9（如下图所示）Inputs and outputs of PARWAN control sections: Applied to, categories, signal name, func

2、tions 实验过程1.1 创建工程（1） 打开ISE13.x软件，选择File-New Project在弹出的对话框中输入工程名和路径。（2） 单击下一步选择所使用的芯片。Spartan3E开发板的芯片型号为Spartan3E XC3S500E芯片，FG320封装。（3） 单击Next，进入工程信息页面，确认无误后，点击Finish完成工程的创建。1.2 测试文件(1) 选择菜单栏中的Project-New Source。(2) 在Select Source Type窗口中，选择左侧的VHDL Test Bench,在右侧File Name栏中输入文件名par_control_unit_tb

3、(3) 单击Next按钮，选择关联文件。1.3 实验截图实验代码在实现过程中，除了定义CPU的信号接口外，还设置了一个输出类型的接口，名字叫present_state_value,主要是用来在调试或仿真的过程中输出CPU所处的状态，便于调试分析。整个状态机的实现过程主要使用了case IS when 逻辑结构。用了present_state 和next_state两个状态变量。详细的实现代码如下所示：LIBRARY IEEE; USE IEEE.std_logic_1164.ALL; USE work.synthesis_utilities.ALL; - ENTITY par_control_

4、unit IS PORT (clk : IN std_logic; - register control signals: load_ac, zero_ac, load_ir, increment_pc, load_page_pc, load_offset_pc, reset_pc, load_page_mar, load_offset_mar, load_sr, cm_carry_sr, - bus connection control signals: pc_on_mar_page_bus, ir_on_mar_page_bus, pc_on_mar_offset_bus, dbus_on

5、_mar_offset_bus, pc_offset_on_dbus, obus_on_dbus, databus_on_dbus, mar_on_adbus, dbus_on_databus, - logic unit function control outputs: arith_shift_left, arith_shift_right : OUT std_logic; alu_and,alu_not,alu_a,alu_add,alu_b,alu_sub: out std_logic; - inputs from the data section: ir_lines : IN std_

6、logic_vector (7 DOWNTO 0); status : IN std_logic_vector (3 DOWNTO 0); - memory control and other external signals: read_mem, write_mem : OUT std_logic; interrupt : IN std_logic; -test present_state_value: out std_logic_vector (3 DOWNTO 0) ); END par_control_unit; - ARCHITECTURE dataflow_synthesizabl

7、e OF par_control_unit IS TYPE cpu_states IS (s1,s2,s3,s4,s5,s6,s7,s8,s9); SIGNAL present_state, next_state : cpu_states; SIGNAL next_state_value: std_logic_vector (3 DOWNTO 0); BEGIN clocking : PROCESS (clk, interrupt) BEGIN IF (interrupt = 1) THEN present_state = s1; present_state_value =0001; ELSI

8、F clkEVENT AND clk = 0 THEN present_state = next_state; present_state_value =next_state_value; END IF; END PROCESS clocking; - sequencing : PROCESS ( present_state, ir_lines, status, interrupt) BEGIN load_ac = 0; zero_ac = 0; load_ir = 0; increment_pc = 0; load_page_pc = 0; load_offset_pc = 0; reset

9、_pc = 0; load_page_mar = 0; load_offset_mar = 0; load_sr = 0; cm_carry_sr = 0; - bus connection control signals: pc_on_mar_page_bus = 0; ir_on_mar_page_bus = 0; pc_on_mar_offset_bus = 0; dbus_on_mar_offset_bus = 0; pc_offset_on_dbus = 0; obus_on_dbus = 0; databus_on_dbus = 0; mar_on_adbus = 0; dbus_

10、on_databus = 0; - logic unit function control outputs: arith_shift_left = 0; arith_shift_right = 0; alu_and =0;alu_not =0;alu_a =0;alu_add =0;alu_b =0;alu_sub =0; - memory control and other external signals: read_mem = 0; write_mem -1 IF (interrupt = 1) THEN reset_pc = 1; next_state = s1; next_state

11、_value =0001; ELSE pc_on_mar_page_bus = 1; pc_on_mar_offset_bus = 1; load_page_mar = 1; load_offset_mar = 1; next_state = s2; next_state_value -2 - read memory into ir mar_on_adbus = 1; read_mem = 1; databus_on_dbus = 1; alu_a = 1; load_ir = 1; increment_pc = 1; next_state = s3; next_state_value -3

12、pc_on_mar_page_bus = 1; pc_on_mar_offset_bus = 1; load_page_mar = 1; load_offset_mar = 1; IF (ir_lines (7 DOWNTO 4) /= 1110) THEN next_state = s4; next_state_value -cla zero_ac = 1; load_ac -cmc cm_carry_sr -asl alu_b = 1; arith_shift_left = 1; load_sr = 1; load_ac -asr alu_b = 1; arith_shift_right

13、= 1; load_sr = 1; load_ac NULL; END CASE; next_state = s2; next_state_value -4 - read memory into mar offset mar_on_adbus = 1; read_mem = 1; databus_on_dbus = 1; dbus_on_mar_offset_bus = 1; load_offset_mar = 1; IF ( ir_lines (7 DOWNTO 6) /= 11 ) THEN ir_on_mar_page_bus = 1; load_page_mar = 1; IF ( i

14、r_lines (4) = 1 ) THEN next_state = s5; next_state_value =0101; ELSE next_state = s6; next_state_value =0110; END IF; ELSE -jsr or bra, do not alter mar - page IF ( ir_lines (5) = 0 ) THEN - jsr next_state = s7; next_state_value =0111; ELSE next_state = s9; next_state_value =1001; END IF; END IF; in

15、crement_pc -5 - read actual operand from memory into mar - offset mar_on_adbus = 1; read_mem = 1; databus_on_dbus = 1; dbus_on_mar_offset_bus = 1; load_offset_mar = 1; next_state = s6; next_state_value -6 IF ( ir_lines (7 DOWNTO 5) = 100 ) THEN -jmp load_page_pc = 1; load_offset_pc = 1; next_state =

16、 s2; next_state_value =0010; ELSIF ( ir_lines (7 DOWNTO 5) = 101 ) THEN - mar on adbus, ac on databus, write -to memory mar_on_adbus = 1; alu_b= 1; obus_on_dbus = 1; dbus_on_databus = 1; write_mem = 1; next_state = s1; next_state_value =0001; ELSIF ( ir_lines (7) = 0 ) THEN - -lda, and, add, sub - m

17、ar on adbus, read memory for -operand, perform operation mar_on_adbus = 1; read_mem = 1; databus_on_dbus = 1; IF ( ir_lines (6) = 0 ) THEN - lda, and IF ( ir_lines (5) = 0 ) THEN - lda alu_a= 1; ELSE - and alu_and= 1; END IF; ELSE - add, sub IF ( ir_lines (5) = 0 ) THEN - add alu_add= 1; ELSE - sub

18、alu_sub= 1; END IF; END IF; load_sr = 1; load_ac = 1; next_state = s1; next_state_value -7 - write pc offset to top of subroutine mar_on_adbus = 1; pc_offset_on_dbus = 1; dbus_on_databus = 1; write_mem = 1; load_offset_pc = 1; next_state = s8; next_state_value -8 increment_pc = 1; next_state = s1; n

19、ext_state_value -9 IF ( all_or (status AND ir_lines (3 DOWNTO 0) = 1) THEN load_offset_pc = 1; END IF; next_state = s1; next_state_value New Project在弹出的对话框中输入工程名和路径。（2） 单击下一步选择所使用的芯片。Spartan3E开发板的芯片型号为Spartan3E XC3S500E芯片，FG320封装。（3） 单击Next，进入工程信息页面，确认无误后，点击Finish完成工程的创建。2.2 设计输入选择Project-Add copy o

20、f source，将实验的源代码添加到工程中。2.3 综合实现（1）编写汇编测试代码（2）用文本编辑器打开实验源代码中的simple.asm文件。（3）将测试代码转换为内存文件（4）编译并执行程序2.4 设计仿真2.5 结果截图编写testbench代码对以上的状态机进行功能仿真。Testbench的核心代码如下： stim_proc: process begin - hold reset state for 100 ns. wait for 10 ns; ir_lines = 01101111; -SUB loc wait for clk_period*10; ir_lines = 1000

21、1111; -JMP loc wait for clk_period*10; ir_lines = 10101111; -STA loc wait for clk_period*10; ir_lines = 11111000; -BRA_V_addr wait for clk_period*10; ir_lines = 11100001; -CLA wait for clk_period*10; end process; 由上代码可见，在测试波形中，选取了4种ir_line的可能值来测试。下面选择两处仿真波形进行分析：图5.1 “STA loc” 仿真波形图 从“STA loc” 仿真波形图中

22、，连续的时钟周期里，ir_line的值都为“10101111”，可知该指令是“STA 1111”。结合parwan的状态转换关系来看，一开始CPU处于s1状态，由于interrupt=0，转到s2状态，再转到s3状态，由于ir_line（7to4）!=”1110”,转到s4状态，由于ir_line（7to4）=”11X0”转到s6状态，最后由于ir_line（7to5）=”1010”转回s1,完成一次循环周期。还可以看到在相应的状态，相应的信号会被设为“1”，如s1中，信号load_page_mar、load_offset_mar、pc_on_mar_page_bus和pc_on_mar_of

23、fset_bus等信号为“1”，状态机的设计相符。图5.2 “CLA” 仿真波形图 从“CLA” 仿真波形图中，我们主要从黄线部分开始往后看，在这的一个时钟周期后ir_line的值都为“11100001”，parwan的指令集可知指令是“CLA”。结合parwan的状态设计来看，一开始CPU处于s1状态，由于interrupt=0，转到s2状态，再转到s3状态，由于ir_line（7to4）=”1110”,转到s2状态，最后在s2和s3中循环。验证了程序的正确性。实验总结：本次作业以以前四次上机为基础，通过利用上机所得的实验能力和部分实验代码，进行本次的Parwan CPU设计，基本上来说，本次作业要比上机更有难度，首先，进行的一次综合性实验，其次，上机时均给出了实验步骤。但不可否认的是，本次实验更能提高我们对Parwan CPU的理解，对提高我们的实验能力更有帮助。