基于超声波倒车雷达外文翻译Word下载.docx

1、译文1：距离测量和监控设备装备汽车反向雷达原文2：ULTRASONIC SENSOR ASSEMBLY FOR A VEHICLE REVERSING RADAR译文2：用超声波传感器组装成车辆换向雷达 DISTANCE MEASURING AND MONITORING DEVICE EQUIPPED AUTOMOBILE REVERSE RADAR（原文1）This design relates to an automobile commutating radar, an ultrasonic sensor comprising the radar. The ordinary car com

2、mutation radar is usually installed in the rear bumper of a car. The vehicle has a commutation radar sensor, a ceramic chip in the polarization electric field, due to the reverse piezoelectric vibration of the aluminum housing and transmitting an ultrasonic signal, and receiving the reflected ultras

3、onic signal into an effective distance. Therefore, a driver will know that this situation is reversed in the rear of the vehicle do not have to stop looking for the front of the vehicle.A good ultrasonic sensor ultrasonic signal should be sent to a central area, produced a strong reaction in order t

4、o achieve a sensitive detection. The distance along the line of its axis with reference to Figure 5, a conventional ultrasonic sensor sensitive areas, the reception sensitivity in a test has 250 cm, and a sensitive, including 60 degree angle in the above 2 （X） cm. Thus, the conventional sensor perfo

5、rmance has a low accuracyIn some vehicles, the most traditional ultrasonic sensor mounted in the front and rear bumpers. Vehicles of a monitor in a dashboard display, ultrasonic sensor detects an obstacle. However, with the conventional ultrasonic sensor has a sensitive wide angle, they must be inst

6、alled in the end of the bumper to prevent the ultrasonic signals interfere with each other. However, the distance in each ultrasonic sensor is so large is still very low detection accuracy. In addition, when parking the vehicle, ultrasonic sensors often detect other vehicles parked next to the vehic

7、le as an obstacle, so the driver may be a false alarm.Accordingly, the present design provides an improved ultrasonic sensors to reduce or eliminate the above problems.Summary of the designThe main purpose is to provide the design of an ultrasonic sensor sensitive to the radar has high precision lon

8、g distance and a little sensitive to the angle of the car for. Other objectives, advantages and novel features of the design will become more apparent from the following detailed description together when an ultrasonic transducer assembly of the vehicle the commutation radar has an ultrasonic sensor

9、 and the two wires. A sleeve is received by the rubber material and has a chamber sensor. A tapered opening that is defined in a front chamber. A wave guide cone is provided to open and close to the sensor in the center of the tapered. By using the sensor assembly, automotive radar there is a revers

10、al of precision long detection distance in a concentrated area.The reference to the diagram, an ultrasonic sensor assembly for a car reversing radar, in accordance with the design consists of a sensor, a set, a guided wave cone, and a housing （ultrasonic sensor has a structure like traditional senso

11、rs, and two wires extending from sensors.Sleeve, usually made of rubber, there is one which is defined as the receiving sensor. A tapered shape of the opening is defined at the front and an opening formed on the lower side to prevent the ultrasonic signal reflected from the ground to cause false ala

12、rms. A flange formed on the rear of the sleeve.The definition channel for receiving signals. A rear cover is provided on the rear side of the space to encapsulate the sensor and the sleeve inside.In the assembled state shown in Figure 2, the guide wave cone installed you like bracket combination con

13、ical opening of the center of the casing and highlights. The heating wire extends the bracket backward and exit back cover. The sleeve is placed in the housing flange butt shoulder wires and heating wire extends from the back cover of the diaphragm. A pad, made of a resin or other soft material, is

14、provided between the sleeve is An ci back cover, so the sleeve and the sensor housing can be stably received.Figure 4 illustrates a detector effect Contrast sensor and unguided wave cone, wherein the solid line illustrates the sensor wave guide cone, and the conflict lines described sensor without t

15、he guided wave taper. As shown in Figure 4, at a test frequency of about 40 kHz （35 kHz）, gift of design of the sensor can be provided to an ultrasonic signal with a Federation higher than traditional sensors. Therefore, the design of detection better than traditional sensors Joan Smith；Mike Howard

16、；国籍：USA出处：United States Patent（译文1）本设计涉及一种汽车换向雷达,用一个超声波传感器组成该雷达。一辆普通汽车换向雷达一般安装在一个汽车的后保险杠。车辆有一个换向雷达传感器,一个陶瓷芯片在极化电场,由于反压电,将铝住房振动和发送超声波信号,并将接收反射的超声波信号，转换成有效的距离。因此,一个司机将知道这个情况在车辆后面逆转不必停顿寻找前面的车辆。一个好的超声波传感器应该发送超声波信号一个集中区域,产生强烈的反响从而实现一个敏感的检测效果。与参考图5,一种传统的超声波传感器抯敏感区域,在一个测试接收灵敏度,已经沿着它的轴线一直线距离为250厘米,和一个敏感包括角在

17、2（X）厘米以上60度。因此,传统的传感器性能有一个低精度。在一些车辆,多数传统的超声波传感器安装在前后保险杠。一个监控在一个仪表板提供的车辆显示,超声传感器检测到障碍物。然而,随着传统的超声波传感器有一个宽敏感的夹角,他们必须分别安装在保险杠的末端为防止超声波信号互相干扰。然而,距离在各自的超声波传感器是这么大的检测精度仍然很低。此外,当停车车辆,超声波传感器经常检测其他车辆停放的车辆旁边作为障碍,所以司机可能被这些虚假的警报。因此,本设计提供了一种改良的超声波传感器来减轻或消除上述问题。总的设计主要目的是提供本设计一个超声波传感器对汽车换向雷达已高精细长敏感距离和一个小的敏感的夹角。其他目

18、标、优势和新颖的特点设计将变得更加明显的从以下详细描述了在一起时一个超声波传感器组件的车辆换向雷达有一个超声波传感器和两个电线。一个套筒是由橡胶材料和有一个室接收传感器。一个锥形开口被定义在一个前端的室。一个导装置被提供在该中心的锥形翻开和紧靠传感器。通过使用传感器总成,汽车雷达可以有一个高的逆转精细长检测距离在一个集中的区域。参照图,一个超声波传感器总成对于一个汽车换向雷达依照本设计是由一个传感器,一套,一个向导装置,和一个住房（超声波传感器具有构造一样的传感器,和两个电线延伸从传感器。有一个通道定义的通过用于接收信号。一个后盖被提供在后侧的装置来封装传感器和套筒里面。在装配状态见图2,该装

19、置安装在你托架结合套管和凸现的中心圆锥形的开口。加热丝延伸在托架向后的后盖。套筒被放置在里面的电线和加热电线延伸从光阑的后盖。一个垫,由树脂或其他软材料,是之间提供套筒是安次封底,所以套筒和传感器可以稳定地接收到信号。 图4说明了一个检测效果比照传感器和无向导装置,其中固体线说明了传感器有向导装置,波浪线说明了传感器没有向导装置。图4所示,在一个测试的频率大约40千赫（35千赫）中,传感器的设计可以提供一种超声波信号高于传统的传感器的信号。因此本设计具有检测效果优于传统传感器的效果。United States Patent （原文2）A distance measurement and mon

20、itoring equipment, equipment automotive mobile anti-radar consists of: a camera is a wide-angle lens installed in the rear of the car the pictures possible obstacles behind the car body; calculate the horizontal distance of the distance measuring inductance two lateral corner of the body an obstacle

21、; and a power supply power photoelectric coupler camera distance measuring inductance, and display. The obstacle is a mirror image processing, and then forwarded to the image of an image synthesizer, transferred to a video processor and a display as shown. A reverse gear signal is a valid signal to

22、trigger the power.The design usually involves car reverse radar, especially II distance measurement and monitoring device equipped car anti-radar, which is available to ultrasonic measurement method for measuring the distance between the car body and an obstacle and show that they have displayed, co

23、nvenient security commutation.The internal structure of the ultrasonic generator the two piezoelectric chip and a resonance board. When its poles plus pulse signal, whose frequency is equal to the natural oscillation frequency of the piezoelectric wafer and the piezoelectric wafer will occur resonan

24、ce, and driven by the vibration of the resonance plate, they generate ultrasound. Conversely, if no voltage is applied between the two electrodes, when the resonant plate receives the ultrasonic, will stress the piezoelectric wafer as a vibration of the mechanical energy is converted to an electric

25、signal, it becomes an ultrasonic receiver. Ultrasonic detecting circuit, the transmission side to obtain the output pulse as a series of square-wave, its width for transmitting ultrasound and receiving ultrasonic time interval, the greater the distance of the measured object, the larger the pulse wi

26、dth, the output pulse number of the measured distance into proportional.Relatively driving through the back of the mirror, the driver is still inevitable at certain angles to deceive death may occasion ally incurred pimple or abrasions. Therefore, the car in reverse for on-street parking is consider

27、ed to be neither too big nor less - a veteran of the small challenges at peak times, and it is especially a big trouble to improvements, revealed three monitors mounted on the side of the car and the rear side, respectively, in order to eliminate any possible dead when the monitor by selecting a dif

28、ferent picture reversed. However, the reference to distract drivers busy monitoring before and after the switch, and to help the deterioration of the situation in the real world, but under the general views.The main object of the design is to provide a distance measuring and monitoring device equipp

29、ed automobile mobile joint anti-radar video synthesis technology awareness and distance measuring inductance, eliminating any dead ends when browsing through the mirror behind the car body behind a driver to see clearly, and the other see digitized distance display on the one hand to ensure a safe c

30、ommutation.Another object of the design is to provide a distance measurement and monitoring equipment, equipment automotive mobile anti-radar, you can display the temperature and no driver through the barrier. In order to achieve the control object, from the design of the monitoring device equipped

31、automobile reverse radar contains: optocoupler camera with a wide-angle lens camera can be installed in the rear of the car to see the obstacles behind the car body.The human ear can hear sound frequencies of 20Hz 20kHz, audible sound waves in this frequency range, beyond the frequency range of soun

32、d, called the low-frequency sound called ultrasonic sound above 20kHz frequency usually speak range 100Hz 8kHz. Ultrasonic mode of transmission is the straight line, the higher the frequency, the diffraction capability weaker, but more reflective ability, ultrasonic sensors made of this nature is the use of ultrasonic waves. In addition, the speed of